Fence cost in Riverside, CA (2026)
For a typical 200 linear ft fence in the Riverside metro, mid-range typically runs $6,179. Labor here averages 3% below national trade wages, with materials at each tier's quality level and contractor overhead applied the way contractors actually bill.
Standard-tier breakdown, line by line
| Line item | Category | Typical cost |
|---|---|---|
| Pickets or panels | Material | $1,600 |
| Rail and panel installation | Labor | $1,008 |
| Dig post holes | Labor | $814 |
| Set posts in concrete | Labor | $807 |
| Fence posts and concrete | Material | $800 |
| Rails | Material | $600 |
| Gate and hardware | Material | $300 |
| Stain or paint | Material | $150 |
| Fasteners and hardware | Supplies | $100 |
| Total (incl. overhead) | $6,179 |
Riverside trade wages behind this estimate
| Trade | SOC | Median /hr | vs. national |
|---|---|---|---|
| Carpenters | 47-2031 | $24.90/hr | −7% |
| Construction Laborers | 47-2061 | $20.10/hr | −0% |
This page shows the typical range. Your project isn't typical — build the line-item estimate for your exact scope in the free iOS app.
Get Renovio for iPhoneFences often require permits. See what California requires and who issues it.
California permit guide →Fences — what homeowners ask
Fence installation costs $15-$50 per linear foot. Chain link runs $15-$25/lnft, wood privacy fence costs $25-$35/lnft, vinyl fence costs $25-$40/lnft, and wrought iron can exceed $40-$100/lnft. A typical 150 lnft fence project costs $3,000-$8,000.
Cedar and pressure-treated wood fences last 15-20 years, vinyl fences last 20-30 years, aluminum lasts 20-30 years, and wrought iron can last 50+ years with proper maintenance.
Many cities require permits for fences over 6 feet tall or in front yards. HOA communities often have height, material, and style restrictions. Always check local zoning laws and HOA rules before installing a fence.